Column: The column, otherwise known as the mast or pillar, is the vertical beam that constitutes the height of the jib crane. Wall-mounted and Forklift jib cranes do not have a column.
Boom/reach: The boom or reach is the horizontal beam that extends out from the column or wall mount. The length of the boom defines the span of the crane, which is often similar to the height of the column, but will be defined by the area the crane is working in. The trolley and hoist move along the boom.
Trolley: The trolley is the unit that rolls along the length of the boom, carrying the hoist, hook and all associated chains, wires and wire ropes. Trolley can be moved manually, mechanically or pneumatically.
Hoist: The hoist is the part of the jib crane that lifts and lowers the load. It is manoeuvred into place by the combined action of the boom and the trolley.
Hook: The hook hangs off the hoist and connects the load to the jib crane. 'Hook height' defines how low and high the load can be lifted, and will depend on the size and limitations of the crane and any obstructions in the immediate area.
Pneumatic airlines/electric collector rings: These parts manage the airlines and power cables that run along the length of the boom to the hoist and under-hook attachments, keeping them out of the way as the trolley rolls and the boom rotates.
Rotation stop: As the name suggests, the role of this part is to ensure that the rotation of the crane is stopped before it collides with anything.
Control buttons: While some jib cranes are entirely manual, most feature buttons that control the rotation of the boom, the movement of the trolley along the boom, and the lifting and lowering of the hoist. You will also usually be able to control the speed at which the trolley and hoist move.






